Material Safty Data Sheet For Fibre Reinforced Plastic Rod（FRP）

Section 1 - Product and Company Identification

Product Name(s): Fibre Reinforced Plastic Rods (FRP Rod) / Central Strength Member

Dan Yang Jie Run Optical Technology Head Office :Room 601, NO.12 block Xinxiangcaoyuan，suiguan road，danyang city，jiangsu province ,china

Section 2 - Composition / Information on Ingredients

Component Percent by Weight

Fiber Glass Continuous / Aramid Yarn 70%-85% Non-hazardous Cured Modified Acrylate Resin 15%-30%

Component Related Regulatory Information

This product may be regulated, have exposure limits or other information identified as the following: Glass filaments, Nuisance particulate.

Component Information/Information on Non-Hazardous Components No additional information available.

Section 3 - Hazards Identification

Appearance and Odor: Glass reinforced rod with no odor.

Emergency Overview No unusual conditions are expected from this product.

Potential Health Effects

Inhalation: Fiber glass continuous filament is a mechanical irritant. Breathing dusts and fibers from cutting this product may cause short-termirritation of the mouth, nose and throat.

Skin Contact:

Dust and fibers from this product may cause itching and short term irritation.

Eye Contact: Dusts and fibers from cutting this product may cause temporary mechanical irritation to the eyes.

Ingestion: Ingestion may cause short-term mechanical irritation of the stomach and intestines.

Medical Conditions Aggravated by Exposure: Respiratory or skin conditions that are aggravated by mechanical irritants may be at an increased risk for worsening from exposure to this product.

Section 4 - First Aid Measures

If inhaled, immediately remove the affected person to fresh air. If symptoms persist, get medical attention.

Skin Contact: For skin contact, wash immediately with soap and water. Use a wash cloth to help remove fibers. To avoid further irritation, donotrub or scratch affected areas. Rubbing or scratching may force fibers into the skin. If irritation persists, get medical attention. Never use compressed air to remove fibers from the skin.

Eye Contact:

Immediately flush eyes with plenty of water for at least 15 minutes. If irritation persists get medical attention.

Ingestion:

Ingestion of this material is unlikely. If it does occur, watch the person for several days to make sure that partial or completeintestinal blockage does not occur.

Section 5 - Fire Fighting Measures

Flash Point: None Flash Point Method: Not applicable

UpperFlammability Limit:Not applicable

LowerFlammabilityLimit:Notapplicable

FlammabilityClassification:Non-flammable

Auto Ignition Temp: Not applicable

Extinguishing Media:

Use any extinguishing media appropriate for the surrounding fires. Unusual Fire & Explosion Hazards:None known.

Fire-Fighting Instructions:

Use self-contained breathing apparatus (SCBA) and full bunker turnout gear in a sustained fire. Hazardous

Combustion Products:

Primary combustion products are carbon monoxide, carbon dioxide and water. Other undetermined compounds could be releasedin small quantities.

Section 6 - Accidental Release Measures

Containment Procedures: This material will settle out of the air. If concentrated on land, it can then be scooped up for disposal as a non-hazardous waste. This material will sink and disperse along the bottom of waterways and ponds. It can not easily be removed after it is waterborne;

however, the material is non-hazardous in water.

Clean-Up Procedures:

Scoop up material and put into a suitable container for disposal as a non-hazardous waste.

Section 7 - Handling and Storage

Handling Procedures:

No special procedures are required for this material.

Storage Procedures:

No special procedures are required for this material.

Section 8 - Exposure Controls / Personal Protection

Exposure Guidelines:

A: General Product Information

As manufactured, continuous filament glass fibers are not respirable. Continuous filament glass products that are chopped, crushedor severely processed during manufacturing or use may contain a very small amount of respirable particulate, some of whichmaybe glass shards.

Ventilation:

General dilution ventilation and/or local exhaust ventilation should be provided as necessary to maintain exposures below occupational exposure limits. PERSONAL PROTECTIVE EQUIPMENT

Respiratory Protection:

A properly fitted dust respirator such as the 3M model 8210 in high humidity environments or equivalent should be used under thefollowing conditions: 1) any dust environment; 2) when mechanically altering product (cutting, crushing, grinding, milling or other similar dust generating process). Use respiratory protection in accordance with your company's respiratory protection program, local regulations.

Skin Protection:

Normal work clothing (long sleeved shirts and long pants) is recommended. Use leather or other appropriate gloves, if necessary, for type of operation. Skin irritation is known to occur chiefly at the pressure points such as around the neck, wrists, waist andbetween the fingers.

Eyes/Face Protective Equipment:

Wear safety glasses or goggles when mechanically altering product (cutting, crushing, grinding, milling or other similar dust generating process).

Work Practices:

Handle using good industrial hygiene and safety practices. Avoid unnecessary contact with dusts and fibers by using goodlocal exhaust ventilation. Remove material from the skin and eyes after contact. Remove material from clothing using vacuumequipment (never use compressed air and always wash work clothes separately from other clothing. Wipe out the washer or sink to prevent

loose glass fibers from getting on other clothing). Keep the work area clean of dusts and fibers made during fabrication by usingvacuum equipment to clean up dusts and fibers (avoid dry sweeping or using compressed air as these techniques re-suspenddusts and fibers into the air.)

Section 9 - Physical & Chemical Properties

Appearance: Flexible fiber glass rod Odor: None

Physical State: Solid

Vapor Pressure (mm Hg @ 20 C): Not applicable

Vapor Density (Air=1): Not applicable

Boiling Point: Not applicable Solubility (H2O): Insoluble

Specific Gravity (Water=1): 2.20

Freezing Point: Not applicable

Evaporation Rate (n-ButylAcetate=1): Not applicable

Section 10 - Chemical Stability & Reactivity Information

Stability: This is a stable material. Conditions to Avoid: None expected. Incompatible Materials: None expected.

Hazardous Decomposition Products: Primary combustion products are carbon monoxide, carbon dioxide and water. Resin may decompose in a fire. Other undeterminedcompounds could be released in small quantities.

Hazardous Polymerization: Will not occur.

Section 11 - Toxicological Information

Acute and Chronic Toxicity:

A: General Product Information Dusts and fibers may cause mechanical irritation to eyes and skin. Ingestion may cause transient irritation of throat, stomach andgastrointestinal tract. Inhalation may cause coughing, nose and throat irritation, and sneezing. Higher exposures may cause difficulty breathing, congestion, and chest tightness.

Carcinogenicity:

A: General Product Information Fiber Glass Continuous Filament: The International Agency for Research on Cancer (IARC) in June, 1987, categorizedfiber glass continuous filament as not classifiable with respect to human carcinogenicity (Group 3). The evidence fromhuman as well asanimal studies was evaluated by IARC as insufficient to classify fiber glass continuous filament as a possible, probable, or confirmed cancer causing material. The American Conference of Governmental Industrial Hygienists (ACGIH) A4classification, not classifiable as a human carcinogen, for respirable continuous filament glass fibers is based on inadequate data in terms of itscarcinogenicity in humans and/or animals. For respirable continuous filament glass fibers, a TLV-TWA of 1 fiber/cc was adoptedtoprotect workers against mechanical irritation. The TLV-TWA of 5 mg/m3 was adopted for nonrespirable glass filament fiber, measured as inhalable dust, to prevent mechanical irritation of the upper respiratory tract.

Section 12 - Ecological Information

Eco-toxicity: This material is not expected to cause harm to animals, plants or fish.

Environmental Fate: No data available for this product.

Section 13 - Disposal Considerations

WasteNumber&Descriptions:

A:General Product Information No components are identified as hazardous wastes.

B: Component Waste Numbers No EPA Waste Numbers are applicable for this product's components.

Disposal Instructions: Consult appropriate authorities before disposing of this material.

Section 14 - Transportation Information

Shipping Name: Not regulated for transport.

Hazard Class: None

UN/NA #: None

Packing Group: None

Required Label(s): None

Additional Info.: None

TDG Information

Shipping Name: Not regulated for transport.

Hazard Class: None

UN/NA #: None

Packing Group: None

Required Label(s): None

Additional Info.: None

Additional Transportation

Regulations: No additional information available.

Section 15 - Regulatory Information

A: General Product Information No additional information available.

B: Component Analysis None of this products components are listed under SARA Section 302 (40 CFR 355 Appendix A), SARA Section 313 (40 CFR372.65), or CERCLA (40 CFR 302.4).

Acute Health Hazard: Yes Chronic Health Hazard: No Fire Hazard: No Sudden Release of Pressure Hazard: No Reactive Hazard: No C: Clean Air Act None of this product's components are listed on the Clean Air Act-1990 Hazardous Air Pollutants List.

State Regulations: A: General Product Information No additional information available. Section 16 - Other Information Personal Protection To be supplied by user depending upon use. Reasonable care has been taken in the preparation of this information, but the manufacturer makes no warranty of merchantabilityor any other warranty, expressed or implied, with respect to this information. The manufacturer makes no representations and assumes no liability for any direct, incidental or consequential damages resulting from its use. Key/Legend: EPA = Environmental Protection Agency; TSCA = Toxic Substance Control Act; ACGIH = American Conference of Governmental Industrial Hygienists; IARC = International Agency for Research on Cancer; NIOSH = NationalInstitute for Occupational Safety andHealth; NTP = National Toxicology Program; OSHA = Occupational Safetyand Health Administration., NJTSR = New Jersey TradeSecret Registry.